|
|
|
|
|
|
|
|
|
|
|
|
Access - Aerial Work Platform Control System |
|
|
|
|
|
|
|
|
|
|
The
Access is an integrated system to control the entire functionality of aerial work platforms including
variable lift, lower and traction. The three modules of the system are connected simply and easily to
enhance machine capability and reduce installation errors.
|
|
- 150A hydraulic pump motor output
- Dual 100A traction motor outputs
- Proportional lift/lower control of platform
- Large, easy-to-read backlit LCD screen
- Multi-lingual, on-board programming
- Internal tilt sensor
- Alarm, beacon and horn outputs.
|
|
|
|
|
| |
The Access Control System consists of 3 modules as follows:
The Joystick Module enables selection between Lift/Lower and Drive at the touch of a button, then precise
positioning of the platform is achieved by variable joystick control.
The Traction Module has two 100A peak variable speed outputs for permanent magnet motors, plus two associated outputs for electromagnetic brakes. The module connects to the Ground Control Module via a serial
link, for simple, hassle free wiring.
The Ground Control Module forms the hub of the connection system, simplifying the wiring harness. This module connects directly
to the system batteries and provides the high current, variable speed output for the hydraulic
pump motor along with the lower current outputs such as a variable down valve, alarm, horn and
beacon. All input switch wiring for pothole switches, elevation or auxiliary inputs is also connected
here to ease servicing of external parts. To see information on the Diagnostic and Programming capabilities....click here |
| |
|
|
|
|
|
| Product Codes |
|
A 150 |
150A Hydraulic Drive
100A Traction Drive |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
