|
Place your mouse arrow over the TruCharge gauge to see an example of a flash rate.
Single Flash Sequence :: Aux 1 fault
Check that the output device (solenoid valve, actuator, pump, etc) connected to the Aux 1 output is operating correctly. Check the associated wiring for breaks, short circuits or other damage.
Two Flash Sequence :: Aux 2 fault
Check that the output device (solenoid valve, actuator, pump, etc) connected to the Aux 2 output is operating correctly. Check the associated wiring for breaks, short circuits or other damage.
If the problems persist after you have made the checks described above
please contact your service agent. |
|
|
