|
Place your mouse arrow over the TruCharge gauge to see an example of a flash rate.
Single Flash Sequence :: Brake Light
Check that the output device(s) (Brake Lights, Beacons, Warning Lights, etc) connected to the Pin 7 on P3 are operating correctly. Check the associated wiring for breaks, short circuits or other damage.
Two Flash Sequence :: Alarm Output
Check that the output device (Alarm, Beacon, Buzzer, etc) connected to the Pin 17 on P3 is operating correctly. Check the associated wiring for breaks, short circuits or other damage.
Three Flash Sequence ::Aux 3 fault
Check that the output device (solenoid valve, actuator, pump, etc) connected to the Aux 3 output is operating correctly. Check the associated wiring for breaks, short circuits or other damage.
Four Flash Sequence :: Aux 4 fault
Check that the output device (solenoid valve, actuator, pump, etc) connected to the Aux 4 output is operating correctly. Check the associated wiring for breaks, short circuits or other damage.
Five Flash Sequence :: Solenoid Brake fault
The parking brakes have a bad connection. Check the parking brake and motor connections. Ensure the control system connections are secure.
If the problems persist after you have made the checks described above
please contact your service agent. |
|
|
