Online Diagnostics

The Diagnostic Process

The primary objective of this facility is to assist service personnel in finding the likely area of a detected trip within the whole vehicle electrical system. It is important to realize that even though the control system is signalling a trip, it may not be the control system itself that is defective. This is because the control system is able to detect problems in other electrical components (motors, batteries, solenoid brakes, etc.) or, more importantly, the wiring to them. When a control system has detected a trip, a system trip is indicated.

Use the Diagnostic Process to identify problems.

Flash Code List

| VSI | VR2 | Pilot+ | S-Drive | Egis | Solo | X25/X30 | Trio+ | I-Drive |

If the vehicle you are working with contains a PG Drives Technology TruCharge battery gauge, these pages will be a valuable working tool. They will enable OEMs, Dealers and Users to identify the area in which their control system has detected a trip, and in some cases even make repairs.

To view the TruCharge diagnostic information specific to the Controller or Control Sytem you are working with, please click above.

Trip Codes

| R-net | VSI | VR2 | Pilot+ | S-Drive | Egis | R-net | Solo | X25/X30 | Trio+ | I-Drive |

If you have a Trip Code from a PG Drives Technology Controller or Control System then use the links above. Trip Codes can be read from Handheld Programmer or an vehicle's on-board LCD Screen.